Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator

Na stanie – Gotowe do natychmiastowej wysyłki!

Płatność ratalna dostępna od 99 € do 5000 € wartości towarów

265 Odwiedzający wykazują zainteresowanie
13 Klienci niedawno kupili ten produkt.
Empfohlenes Zubehör
Aufpreis
Stacja lodu PUM Alphacool VPP z pompą lodu Alphacool VPP755 V.3
1x
lodu PUM Alphacool VPP z pompą lodu Alphacool VPP755 V.3
332,56 zł*
WAC Alphacool Eisblock XPX 1U – wersja z czarnego acetalu
1x
Alphacool Eisblock XPX 1U – wersja z czarnego acetalu
316,18 zł*
Wąż Alphacool S13 AlphaTube TPV 12,7/7,6 — czarny matowy 3,3 m (10 stóp) opakowanie detaliczne 330 cm
1x
Alphacool S13 AlphaTube TPV 12,7/7,6 — czarny matowy 3,3 m (10 stóp) opakowanie detaliczne 330 cm
83,08 zł*
Dysza nakręcana ANS Alphacool HF TPV - 12,7/7,6 mm prosta - czarna - zestaw 6 szt.
1x
nakręcana ANS Alphacool HF TPV - 12,7/7,6 mm prosta - czarna - zestaw 6 szt.
74,76 zł*
WAZ Alphacool Apex Płyn ECO 1000ml przezroczysty
1x
Alphacool Apex Płyn ECO 1000ml przezroczysty
62,50 zł*
332,56 zł *

Ceny incl. VAT plus koszty wysyłki

Proszę o poinformowanie mnie gdy produkt będzie ponownie dostępny.

Zapoznałem się z Postanowieniami dotyczącymi ochrony danych.

RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL
RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL
332,56 zł 0,00 zł Ceny incl. VAT plus koszty wysyłki
Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world...węcej
Informacje o produkcie

Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world that uses only copper for all water-bearing parts in the radiator. The pre-chambers, cooling fins and cooling channels are made of pure copper. Only the fitting threads (made of brass) and the outer casing of the radiator (made of sheet steel) are made of other materials.

HPE = High Performance
The HPE radiators are based on the NexXxoS series. But what is new? The HPE variant has additional cooling channels and a very high fin density. Due to the technical design, the cooling capacity increases significantly without restricting the water flow within the radiator. If the radiator is equipped with fans on both sides in push/pull operation, it is possible to achieve a significant temperature reduction compared to standard radiators.

Powerful cooling performance
To maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers. Due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The high fin density of the radiator with a fin spacing of 16 FPI enables an optimal flow of air. All cooling fins are additionally equipped with small flaps. These are tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises the possible noise created by airflow.

Connection options & mounting
The NexXxoS HPE radiators each have an IN & OUT connection with G1/4" thread. All screws for mounting the fans are included with the radiator. Additional screws are usually not required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

 

Technical data radiator
L x W x H286 x 80 x 42 mm (+/- 3% tolerance in the range of the prechamber)
Quantity of cooling channels16
Material cooling fins, pre-chambers & channelscopper
Material threadsbrass
Material outer housingstainless steel
Threads2x G1/4" IN/OUT (max. 5mm thread length)
Possible fan size80mm
Possible fan assembly3x one-sided / 6x both-sided
Thread size fan mountingM3
Pressure tested0,8 Bar
Maximum working temperature60°C
Fin density16 FPI
Weight630g
Colorblack

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails
Numer zamówienia: 1021491
Nr producenta: 14438
EAN: 4250197144384
Waga: 0,76 kg
Dostępne: Obecnie dostępnych jest 2 - Więcej w drodze
Producent: Alfacool
Wykonano w: Chiny
Płetwy na cal: 16
Mieszkania: Stal;
Kanały chłodzące: Miedź
Listwy: Miedź
Wątek fanowski: M3
Rozmiar wentylatora: 80mm;
Wymiary (dł. x szer. x wys.): 286 x 80 x 42 mm
Połączenie: 2x G1/4"
Liczba fanów: 3;
Grubość: 49 - 69 mm
Testowane ciśnieniowo: 0,8 bara
Kolor: Czarny

Dalsze linki

CLP-/REACH-Hinweise
Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.
Hersteller
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Hersteller Veranwortlicher
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Oceny 0
Czytać, pisać i dyskutować opinie...węcej
Oceny klientów "RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL"
Napisz oceny
Opinia zostanie aktywowana po weryfikacji.

Wymagane są pola oznaczone *.

Zapoznałem się z Postanowieniami dotyczącymi ochrony danych.