Alphacool ES 80mm 800-6,000rpm Fan ( 80x80x25mm ) - Two Ball Bearing - PWM (JE8025B12V)

Ten produkt zostanie wydany w 5 stycznia 2026

Płatność ratalna dostępna od 99 € do 5000 € wartości towarów

339 Odwiedzający wykazują zainteresowanie
206 Klienci niedawno kupili ten produkt.
Empfohlenes Zubehör
Aufpreis
LK Phobya Kabel Y 4Pin PWM do 3x 4Pin PWM - Czarny 60cm EOL
1x
Phobya Kabel Y 4Pin PWM do 3x 4Pin PWM - Czarny 60cm
22,18 zł*
LK Phobya Kabel Y 4Pin PWM na 4x 4Pin PWM - czarny 60cm
1x
Phobya Kabel Y 4Pin PWM na 4x 4Pin PWM - czarny 60cm
29,27 zł*
Śruby do wentylatorów LZ, 4 sztuki 16mm - srebrne
1x
do wentylatorów LZ, 4 sztuki 16mm - srebrne
9,62 zł*
LK Phobya Kabel Y 4Pin PWM 2x 4Pin PWM - Czarny 10cm
1x
Phobya Kabel Y 4Pin PWM 2x 4Pin PWM - Czarny 10cm
18,82 zł*
53,97 zł * 121,70 zł * (55,65% )

Ceny incl. VAT plus koszty wysyłki

Proszę o poinformowanie mnie gdy produkt będzie ponownie dostępny.

Zapoznałem się z Postanowieniami dotyczącymi ochrony danych.

L80 Alphacool ES 80mm 800-6,000rpm Fan ( 80x80x25mm ) - Two Ball Bearing - PWM (JE8025B12V)
L80 Alphacool ES 80mm 800-6,000rpm Fan ( 80x80x25mm ) - Two Ball Bearing - PWM (JE8025B12V)
53,97 zł 121,70 zł Ceny incl. VAT plus koszty wysyłki
The Alphacool ES fans have been specially developed for use in servers and workstations and,...węcej
Informacje o produkcie

The Alphacool ES fans have been specially developed for use in servers and workstations and, unlike usual, do not offer a 2 or 3-pin DC power connection, but a 4-pin PWM control.

PWM control
Instead of the usual 2 cables or the 3-pin connector Alphacool now also uses a 4-pin PWM connector for enterprise fans, which is supported by more and more server mainboards. Via the 4-pin PWM connector, the fan always receives full voltage and is controlled by pulse width modulation. This allows the fan to be controlled over a much wider speed range. A considerable amount of energy can be saved whilst controlling the fans in server racks and with 0% PWM control, the fans can even be stopped completely. The fan also offers a soft start, which increases the service life of the fan and reduces the risk of injury. At speeds of several thousand revolutions per minute, no parts of the body should get between the fan blades.

Double ball bearings
Unlike classic plain bearing, Alphacool ES fans have a double ball bearing for increased service life under full load. Double ball bearings are generally regarded as the highest quality bearings in terms of durability and quality. This also ensures a high level of running smoothness in terms of minimal vibration.

Protection circuits
All Alphacool Enterprise fans have multiple protection circuits. If the fans are blocked, they automatically try to restart at reduced speed after a few seconds. Thanks to the soft start, including the emergency start function, the fan can be blocked for up to 72 hours without suffering damage. In case of wrong polarity when connecting the fan, a burn-out of the electronics for at least 5 seconds is impossible. If the fan is connected incorrectly for a short time, this is no problem.

The Alphacool ES fans for servers and workstations offer an extremely high air flow and an extremely high static pressure. They are therefore ideal for use on radiators or as particularly powerful case fans.

 

Technical data
Dimensions (L x W x H)80 x 80 x 25mm
Speed800-6000rpm
BearingTwo ball bearing
Connection4-Pin PWM
Cable length30cm
Operation voltage7 - 14V
Start voltage min.7V
Power consumption0,66 - 0,85A (7,92 - 10,2W)
Static pressure14,29 mm H2O
Max. air flow130,83 m³/h
Noise50 dB(A)
MTBF70.000h
colorblack

Security features
Automatic ShutdownAutomatic switch-off if the fan is blocked
Automatic restartingRestart attempt after 2-6 seconds if blocked
Damage due to blockingIt is guaranteed that the fan will not be damaged if it is blocked for up to 72 hour

Warranty: 3 years
🔗 Warranty Terms

Produktdetails
Numer zamówienia: 1020166
Nr producenta: 24829
EAN: 4250197135795
Waga: 0,105 kg
Dostępne: Obecnie niedostępny
Producent: Alfacool
Znamionowy zakres prędkości: 800 - 6000 obr./min
Wykonano w: Chiny
Obszar transportu powietrza: 100 - 149 m3/h
Wydajność dostarczania powietrza: 130,93 m³/h
Ciśnienie: 14,29 mm H2O
Kolorowa ramka: Czarny;
Prędkość znamionowa: 6000 obr./min
Kolorowy rotor: Czarny;
Napięcie nominalne: 12 V prądu stałego
Rozmiar: 80mm
Tom: 50dB(A)
Transmisja sygnału obrotów: Tak
Zakres głośności: 30 - 49,9 dB(A)
Napięcie początkowe: 7 V
Żywotność (przy 25°C): 70 000 godzin
Podłączenie zasilania: 4-stykowe;
Wymiary: 80x80x25mm
PROWADZONY: Nie płynny;
Pobór energii: 10,2 W

Dalsze linki

CLP-/REACH-Hinweise
Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.
Hersteller
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Hersteller Veranwortlicher
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Oceny 0
Czytać, pisać i dyskutować opinie...węcej
Oceny klientów "L80 Alphacool ES 80mm 800-6,000rpm Fan ( 80x80x25mm ) - Two Ball Bearing - PWM (JE8025B12V)"
Napisz oceny
Opinia zostanie aktywowana po weryfikacji.

Wymagane są pola oznaczone *.

Zapoznałem się z Postanowieniami dotyczącymi ochrony danych.