Aquacomputer aquainlet PRO 150 ml, G1/4

  • 45361
  • 34064
  • 4260073417051
  • 0,627 kg
  • Es sind weniger als 5 Artikel verfügbar
203 Visitors show interest
79 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€51.79 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

I have read the data protection information.

AGB Aquacomputer aquainlet PRO 150 ml, G1/4
AGB Aquacomputer aquainlet PRO 150 ml, G1/4
€51.79 €0.00 Prices incl. VAT plus shipping costs
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an... more
Product information
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.

The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod.

The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.

All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.

Technical details:
Dimensions without pump: approx. 56 x 67 x 198 mm
Filling volume: approx. 150 ml
Connection threads: G1/4

Compatible to the following pumps:
- aquastream XT
- Eheim 1046 and pumps identical in construction

Scope of delivery:
One Reservoir
Three sealing screws G1/4 (preinstalled)

Please note:
Fittings and pump are not included in delivery, please order seperately.

Further links

Jetzt nützliche Details ansehen... more
colour: schwarz
Pump preinstalled: Nein
connector: G1/4" Innengewinde
fill port: G1/4" Innengewinde
LED holes: available (for 5mm LEDs)
container type: Aufsatzbehälter
Number of Connectors: 3
pump compatibility: für Eheim 1046
dimensions: 56 x 67 x 198mm
capacity: 150ml
manufacturer: Aquacomputer
material: Borosilikatglas
Questions & answers... more
Questions & answers
No questions have been asked so far.
Do you have a question?
Note: Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly name and your email notifications in your customer account. configure.
Read, write and discuss reviews... more
Customer evaluation for "AGB Aquacomputer aquainlet PRO 150 ml, G1/4"
15 Jul 2023

Good if you like leaks from factory

The Aqualis line are brilliant reservoirs, beautiful to look at, does the job well and can do it in style if you break out the RGBs and fountain effects. You get to the Aquainlet cousins, however, and you better stock up on distilled water, since both models I've tried (100ml XT and this 150ml PRO) are yet to hold water paired with brand new Eheim pumps. They dribble all their liquid out like an infant and it turns out the reason is because their o-rings disintegrate upon delivery. Both my 100ml and this 150ml had o-rings shredded when installed, even when lightly lubricated with water. I have a bag of 50 o-rings on order so hopefully at least 2 of them survive being gently installed onto these reservoirs since the factory ones obviously can't. Unnecessary delays when I could have otherwise been enjoying my newly built machine.

Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.