PUM EK Water Blocks EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Acryl EOL

EK Water Blocks EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Acryl

この商品は次の時期に入荷見込みです 2025年12月29日

¥16092,45 の間で分割払いが可能808675.44円の商品金額

306 来場者が関心を示す

116 顧客は最近、この商品を購入しました。

35,184.00¥ *

VAT込み、送料込み

この商品が発送可能になったら通知してください。

PUM EK Water Blocks EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Acryl

35,184.00¥ 0.00¥ VAT込み、送料込み

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir... その他

メニューを閉じる

Produktinformationen

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.)

Another three industry-standard G1/4" ports are available in the bottom combo housing. The upgrade compared to the previous combo unit is the 3rd available side port usable as either an optional inlet or a drain port.

A special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration-induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities.

The 60mm diameter tube is made of high-quality acrylic material just like the reservoir bottom and top while the sealing is performed by a quality EPDM o-ring. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible.

The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header.

This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.

Pump electrical and mechanical properties:

- Motor: Electronically commuted spherical motor

- Rated voltage: 12V DC

- Power consumption: 23W

- Maximum pressure head: 3.9m

- Maximum flow: 1500L/h

- Maximum system temperature: 60°C

- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal

- Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector

Technical specifications:

- Reservoir diameter 60mm

- Reservoir free volume: 405mL

- Overall unit height: 300mm

- Mounting hole pattern: 65x34mm

- D-RGB connector standard 3-pin (5+, Digital, Blocked, Ground)

Operational regime:

- PWM duty cycle: ~ 20-100%

- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present

Enclosed:

- EK-Quantum Kinetic TBE 300 D5 PWM D-RGB

- Mounting clip with rubber insert

- Self-adhesive mounting hole pattern sticker

- Mounting mechanism (incl. required Allen keys)

- Installation manual

Made in Slovenia - EU!

Pump motor made in Hungary - EU!

Produktdetails

商品番号:	1019947
メーカー番号：	3831109818497
EAN:	3831109818497
重さ：	1,04 kg
利用可能：	現在ご利用いただけません

メーカー:	EKウォーターブロック
寸法:	297,89 x 91,09 x 78mm
最大搬送高さ:	3,9m, 良好 (2～4m)
システムの最大温度:	60℃
最大流量:	1500リットル/時, Extrem (größer 1400 l/h)
制御可能範囲:	20～100%
色:	透明
テンション:	DC12V
電源接続:	4Pin, 4Pin PWM FAN connector
水出口:	G1/4" 雌ネジ
給水口:	G1/4" 雌ネジ
消費電力:	23W
材料:	PPSプラスチック, アクリル, ステンレス鋼, 無煙炭, 酸化アルミニウム