PUM Laing Xylem DDC-Pumpe 12V DDC 4.2 PWM

-26%

Laing Xylem DDC-Pumpe 12V DDC 4.2 PWM

Ten produkt zostanie wydany w 30 czerwca 2026

Płatność ratalna dostępna od 99 € do 5000 € wartości towarów

478 Odwiedzający wykazują zainteresowanie

73 Klienci niedawno kupili ten produkt.

312,86 zł * 424,73 zł * (26,34% )

Ceny incl. VAT plus koszty wysyłki

Proszę o poinformowanie mnie gdy produkt będzie ponownie dostępny.

Laing Xylem DDC-Pumpe 12V DDC 4.2 PWM

312,86 zł 424,73 zł Ceny incl. VAT plus koszty wysyłki

This pump is the first pump worldwide which is used in mass-produced water cooled workstations...węcej

Zamknij menu

Informacje o produkcie

This pump is the first pump worldwide which is used in mass-produced water cooled workstations and is ideal for the watercooling of processors and electronic components. Due to its compact size and its power it can be used for many applications.

This DC pump is an electronically commuted ball motor pump with an estimated lifespan of more than 50.000hrs at 12V. The only moving part on the pump is the spherically shaped Rotor unit which is sitting on an ultra-hard, wear-resistant ceramics bearing ball.

A conventional shaft with bearings and seals is not used or needed. The spherical bearing of the rotor unit on the ceramics bearing ball has many advantages: The development of bearing clearance is technically impossible which results in the impossibility of noise level increase over the lifespan of the pump. The bearing is self-adjusting, making the pump consistently quiet in operation over the full lifespan. The pump is directly lubricated by the coolant (wet-running pump). Therefore no maintenance is required.

As the rotor is magnetically held in place even small dirt particles pose no problem for the mechanism, a blocking of the pump is not possible under normal operating conditions. Even after a long period of standstill reliable operation is ensured. The permanent magnetic rotor unit is frictionlessly driven by a magnetic field which is produced by the surrounding stator.

The stator is completely built around the rotor, therefore the pump is with its 38mm only slightly higher than the stator unit. It therefore fits a in almost any PC case, may it be Super tower or Barebone. A separate magnetic shielding is usually not required. The ball motor principle allows powerful yet power-saving operation. The pump can be regulated by power variations of the DC operating voltage over a wide range. All parts in touch with the coolant are completely corrosion free.

Pump tacho: With 4-pin Molex connector as pump tacho output (for mainboards or control units)

Why are there Swiftech and Laing Versions? Are they different?
The latter question can be answered quickly: No! Here an explanation: Lain produces all pumps in Hungary. They are just labelled differently for Overseas markets and the European market. The pumps themselves are threfore exactly identical. The overseas version has Swiftech as a distributor and the European version is neutrally black. The cheaper Swiftech pumps are usually shipped with decouplers, the Laing pumps usually not. The power, pressure head, flow rates. etc. are exactly the same.

Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing!

Technical data
L x W x H	91 x 70 x 40mm
Material	stainless steel, carbon, ceramic, Luranyl KR 2403 GW T4, Fortron, EPDM70
Speed	1000 - 4500 rpm
Max power consumption	20W
Voltage	12V DC
Power connector	4-Pin Molex
PWM control/speed readout	4-Pin Molex
Max. working temperature ambiente	10°C - 50°C
Max. working temperature water	10°C - 60°C
Max. head of pump	4,34m
Max. flow	517 L/h
Max. pump pressure	0,4 bar
Weight	220g
Color	black

Produktdetails

Numer zamówienia:	1026581
Nr producenta:	60E0C2101YYY004
EAN:	4049469349899
Waga:	0,252 kg
Dostępne:	Obecnie niedostępny

Producent:	Laing
Wykonano w:	Hungary
Wymiary:	91 x 70 x 40 mm
Maksymalna wysokość dostawy:	Ekstremalne (większe niż 4 m)
Maksymalna temperatura systemu:	60°C
Maksymalny przepływ:	517 l/godz, 1500 l/godz
Możliwy zakres regulacji:	6-13,2 V prądu stałego
Kolor:	Czarny
Napięcie:	12 V prądu stałego
Podłączenie zasilania:	4Pin
Wylot wody:	Dysza węża 8-10mm
Dopływ wody:	Dysza węża 8-10mm
Zatwierdzone płyny:	Mieszanka woda/glikol
Pobór energii:	20 W
Materiał:	Twardy węgiel

węcej

Zamknij menu

CLP-/REACH-Hinweise

Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.

Hersteller

Xylem Water Solutions Deutschland GmbH
Bayernstraße 11
30855 Langenhagen Deutschland
Info.de@xylem.com
0511 7800-0

Hersteller Veranwortlicher

Xylem Water Solutions Deutschland GmbH
Bayernstraße 11
30855 Langenhagen Deutschland
Info.de@xylem.com
0511 7800-0

Czytać, pisać i dyskutować opinie...węcej

Zamknij menu

Oceny klientów "Laing Xylem DDC-Pumpe 12V DDC 4.2 PWM"

Napisz oceny

Opinia zostanie aktywowana po weryfikacji.

Podobne artykuły

34%

Laing

Pompa PUM Laing DDC 12V DDC-1RT Plus z gwintem zewnętrznym 2xG1/4

331,76 zł * 499,70 zł *

Ceny incl. VAT plus koszty wysyłki

Laing

Pompa PUM Laing DDC 12V DDC-1RT z 2xG1/4 gwintem zewnętrznym EOL

251,96 zł *

Ceny incl. VAT plus koszty wysyłki

29%

Laing

Pompa PUM Laing DDC 12V DDC-1T

249,40 zł * 349,76 zł *

Ceny incl. VAT plus koszty wysyłki

28%

Laing

Pompa PUM Laing DDC 12V DDC-1T Plus

270,19 zł * 374,75 zł *

Ceny incl. VAT plus koszty wysyłki

Laing Xylem DDC-Pumpe 12V DDC 4.2 PWM

Podobne artykuły

Doradztwo osobiste

Szybka dostawa z Niemiec

Profesjonalne doradztwo i obsługa

Dobry stosunek ceny do wydajności

Bezpieczna płatność

Darmowy bis

30-dniowe prawo zwrotu