EK Water Blocks EK-Quantum Vector N+ RX 6800XT/6900XT D-RGB - Nickel + Acryl

Op voorraad – Klaar voor onmiddellijke verzending!

Termijnbetalingen mogelijk tussen € 99 en € 5000 aan goederen

203 Bezoekers tonen interesse
5 Klanten hebben dit product onlangs gekocht.
Empfohlenes Zubehör
Aufpreis
ANS Alphacool Eiszapfen 13/10mm opschroefmondstuk G1/4 - Diep Zwart
2x
Alphacool Eiszapfen 13/10mm opschroefmondstuk G1/4 - Diep Zwart
€ 6,22*
ANS Alphacool Eiszapfen 13/10mm opschroefmondstuk 90° draaibaar G1/4 - Diep Zwart
2x
Alphacool Eiszapfen 13/10mm opschroefmondstuk 90° draaibaar G1/4 - Diep Zwart
€ 8,40*
ANZ Alphacool Eiszapfen borgschroef G1/4 - Diep Zwart
2x
Alphacool Eiszapfen borgschroef G1/4 - Diep Zwart
€ 2,65*
ANS Alphacool Eiszapfen PRO 13 mm HardTube fitting G1/4 - diepzwart
2x
Alphacool Eiszapfen PRO 13 mm HardTube fitting G1/4 - diepzwart
€ 6,91*
WÄM Alphacool Subzero Thermisch vet 3,5 g
1x
Alphacool Subzero Thermisch vet 3,5 g
€ 6,41*
WAZ Alphacool Apex Vloeistof ECO 1000ml helder
1x
Alphacool Apex Vloeistof ECO 1000ml helder
€ 14,88*
€ 44,90 *

Prijzen incl. btw excl. verzendingskosten

Verwittig mij wanneer het product leverbaar is.

Ik heb de gegevens bescherming informatie gelezen.

WAK EK Water Blocks EK-Quantum Vector N+ RX 6800XT/6900XT D-RGB - Nickel + Acryl EOL
WAK EK Water Blocks EK-Quantum Vector N+ RX 6800XT/6900XT D-RGB - Nickel + Acryl EOL
€ 44,90 € 0,00 Prijzen incl. btw excl. verzendingskosten
EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK®...meer
Productinformatie

EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture.

EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs
EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO+ Radeon, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine.

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.

The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block
The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 8 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

Backplate for the N+ 6800XT/6900XT water block
EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections.

Technical Specification

  • Dimensions: (LxHxW) - 285x149x16.5mm

Enclosed

  • EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block
  • Mounting mechanism with screw-in brass standoffs
  • Necessary mounting screws, nuts, and washers
  • 2x Nickel plated brass plug G1/4”
  • EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
  • Thermal pads
  • Thermal grease EK-TIM Ectotherm (1g)
Produktdetails
Productnr.: 1022110
Fabrikantnr: 3831109844298
EAN: 3831109844298
Gewicht: 1,195 kg
Beschikbaar: Er zijn nog meer dan 25 artikelen beschikbaar
Fabrikant: EK-waterblokken
Gemaakt in: Slowenien
Koeler type: Volledige koeler
Materiaal bodemplaat: Vernikkeld koper;
Materiaal deksel: Acryl;
Dimensies: 285 x 149 x 16,5 mm
Verbinding: 4x G1/4"
Hardwarefabrikant: AMD
Hardware-model: Radeon RX 6800XT;Radeon RX 6900XT;
CLP-/REACH-Hinweise
Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.
Hersteller
EKWB d.o.o.
Pod lipami 18
SI-1218 Komenda Slovenia - EU
info@ekwb.com
0386 1 828 4998
Hersteller Veranwortlicher
EKWB d.o.o.
Pod lipami 18
SI-1218 Komenda Slovenia - EU
info@ekwb.com
386 1 828 4998
Lees, schrijf en bespreek beoordelingen...meer
Klantbeoordelingen voor "WAK EK Water Blocks EK-Quantum Vector N+ RX 6800XT/6900XT D-RGB - Nickel + Acryl EOL"
Beoordeling schrijven
Beoordelingen worden na controle vrijgegeven.

De met een * gemarkeerde velden zijn verplichte velden.

Ik heb de gegevens bescherming informatie gelezen.