Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator

In magazzino – Pronto per la spedizione immediata!

Possibilità di rateizzazioni tra 99€ e 5.000€ di merce

265 I visitatori mostrano interesse
13 I clienti hanno acquistato recentemente questo prodotto.
Empfohlenes Zubehör
Aufpreis
PUM Stazione del ghiaccio Alphacool VPP inclusa pompa del ghiaccio Alphacool VPP755 V.3
1x
Stazione del ghiaccio Alphacool VPP inclusa pompa del ghiaccio Alphacool VPP755 V.3
79,18 €*
WAC Alphacool Eisblock XPX 1U - Versione in acetale nera
1x
Alphacool Eisblock XPX 1U - Versione in acetale nera
75,28 €*
Tubo S13 Alphacool AlphaTube TPV 12.7/7.6 - Nero opaco 3,3 m (10 piedi) scatola al dettaglio 330 cm
1x
S13 Alphacool AlphaTube TPV 12.7/7.6 - Nero opaco 3,3 m (10 piedi) scatola al dettaglio 330 cm
19,78 €*
Ugello avvitabile ANS Alphacool HF TPV - 12,7/7,6 mm dritto - nero - kit da 6
1x
avvitabile ANS Alphacool HF TPV - 12,7/7,6 mm dritto - nero - kit da 6
17,80 €*
WAZ Alphacool Apex Liquido ECO 1000ml trasparente
1x
Alphacool Apex Liquido ECO 1000ml trasparente
14,88 €*
79,18 € *

Prezzi incl. IVA più spese di spedizione

Informatemi non appena il prodotto è nuovamente disponibile.

Ho letto la Politica sulla protezione dei dati.

RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL
RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL
79,18 € 0,00 € Prezzi incl. IVA più spese di spedizione
Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world... altro
Informazioni sul prodotto

Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world that uses only copper for all water-bearing parts in the radiator. The pre-chambers, cooling fins and cooling channels are made of pure copper. Only the fitting threads (made of brass) and the outer casing of the radiator (made of sheet steel) are made of other materials.

HPE = High Performance
The HPE radiators are based on the NexXxoS series. But what is new? The HPE variant has additional cooling channels and a very high fin density. Due to the technical design, the cooling capacity increases significantly without restricting the water flow within the radiator. If the radiator is equipped with fans on both sides in push/pull operation, it is possible to achieve a significant temperature reduction compared to standard radiators.

Powerful cooling performance
To maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers. Due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The high fin density of the radiator with a fin spacing of 16 FPI enables an optimal flow of air. All cooling fins are additionally equipped with small flaps. These are tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises the possible noise created by airflow.

Connection options & mounting
The NexXxoS HPE radiators each have an IN & OUT connection with G1/4" thread. All screws for mounting the fans are included with the radiator. Additional screws are usually not required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

 

Technical data radiator
L x W x H286 x 80 x 42 mm (+/- 3% tolerance in the range of the prechamber)
Quantity of cooling channels16
Material cooling fins, pre-chambers & channelscopper
Material threadsbrass
Material outer housingstainless steel
Threads2x G1/4" IN/OUT (max. 5mm thread length)
Possible fan size80mm
Possible fan assembly3x one-sided / 6x both-sided
Thread size fan mountingM3
Pressure tested0,8 Bar
Maximum working temperature60°C
Fin density16 FPI
Weight630g
Colorblack

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails
Numero Ordine: 1021491
N. produttore: 14438
EAN: 4250197144384
Peso: 0,76 kg
Disponibile: Attualmente disponibili: 2 - Altro in arrivo
Produttore: Alphacool
Fatto in: Cina
Alette per pollice: 16
Alloggiamento: Acciaio;
Canali di raffreddamento: Rame
Doghe: Rame
Filo del ventaglio: M3
Dimensioni della ventola: 80mm;
Dimensioni (L x P x A): 286×80×42 mm
Connessione: 2xG1/4"
Numero di fan: 3;
Spessore: 49-69 mm
Testato a pressione: 0,8 bar
Colore: Nero

Link correlati

CLP-/REACH-Hinweise
Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.
Hersteller
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Hersteller Veranwortlicher
Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "RAD Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator EOL"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.

I campi contrassegnati con * sono obbligatori.

Ho letto la Politica sulla protezione dei dati.