Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate

  • 1020891
  • 14413
  • 4250197144131
  • 4,86 kg
  • Il y a encore plus de 50 articles disponibles
1352 Les visiteurs montrent de l'intérêt
321 Les clients ont récemment acheté ce produit.

en stock

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

178,18 € *

Prix dont TVA plus frais de port

Accessoires recommandés
Supplément
RAD Alphacool NexXxoS ST30 plein de cuivre 360mm Radiateur V.2
1x
Alphacool NexXxoS ST30 plein de cuivre 360mm Radiateur V.2
79,18 €*
S13 Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail
1x
Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail
18,78 €*
ANS Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit
1x
Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit
16,88 €*
WAC Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB
1x
Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB
74,23 €*
WAZ Alphacool Tec Protect 2 Clear 1000ml
1x
Alphacool Tec Protect 2 Clear 1000ml
13,88 €*
Avertissez-moi lorsque l'article sera de nouveau disponible.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate
KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate
178,18 € 0,00 € Prix dont TVA plus frais de port
Accessoires recommandés
Supplément
RAD Alphacool NexXxoS ST30 plein de cuivre 360mm Radiateur V.2
1x
Alphacool NexXxoS ST30 plein de cuivre 360mm Radiateur V.2
79,18 €*
S13 Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail
1x
Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail
18,78 €*
ANS Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit
1x
Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit
16,88 €*
WAC Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB
1x
Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB
74,23 €*
WAZ Alphacool Tec Protect 2 Clear 1000ml
1x
Alphacool Tec Protect 2 Clear 1000ml
13,88 €*
The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based...plus
Informations sur le produit

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.

Fullcover Waterblock?
The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.

Pump
The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.

Fittings and Tubing
As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.

Expandability
By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.

Lighting and fans
The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.

NexXxoS Radiator
As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.

The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.

Technical note!
Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

 

Compatibility:
- NVIDIA GeForce RTX 3080 Founders Edition
- NVIDIA GeForce RTX 3080 Ti Founders Edition

 

Data radiator
L x W x H395 x 124 x 30mm (+/- 3%)
Material cooling finsCopper
Material chambersCopper
Material cooling channelsCopper
Material threadsBrass
Material outer housingstainless steel
G 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)
For fan size120 mm
Possible fan assembly3 x one-sided / 6 x both-sided

Data cooler and pump
L x W x H204,5 x 121,5 x 46 mm
Material cooler bottomChrome plated copper
Material cooler topPMMA
Threads2 x G1/4“
Pump typeDC-LT 2
Pump speed2600 rpm (+/- 10%)
Head of delivery1 m
Maximum flow rate72 L/h
Voltage6-13.5V DC
Power consumption3.2W
MTBF50.000 h

Data liquid
Colorclear
Ingredient 1Destilled water (CAS-number 7732-18-5)
Ingredient 2Glysantin (CAS-number 1017-21-1)
Working temperatures-15 C° / +90 °C

Data quick fasteners
L x D95 x 27 mm
MaterialNylon
For tube size12,7 / 7,6 mm
ColorBlack

Data fittings
L x D straight fitting24 x 18 mm
Quantity straight fittings2x
L x B x H 90° fitting35 x 27 x 17 mm
Quantity 90° fittings2x
For tube size12,7 / 7,6 mm
Material fittingsBrass

Data tube
Length50 cm
Material tubeTPV (EPDM/PP)
ColorMatt black
Tube size12,7 / 7,6 mm
Hardness grade35 Shore-A to 50 Shore-D
Working temperature-50 to +155 °C

Data fan
Speed0 - 2500 RPM
Static pressure3,17 mm H2O
Air flow rate119,8 m³/h
BearingsSleeve bearing
Fan connector4-Pin PWM
Connection Digital aRGB3-Pin JST + 3-Pin 5V
Dimensions120 x 120 x 25 mm
Net weight187 g
Max working temperature60 °C

Remarque sur l'utilisation
A n'utiliser qu'en combinaison avec des liquides de refroidissement à eau clairs et transparents. Les particules et les additifs contenus dans les liquides Pastell peuvent obstruer et endommager durablement les produits de refroidissement à eau tels que les radiateurs, les pompes, les radiateurs et les tuyaux. Cela peut également entraîner l'annulation de la garantie du fabricant.

Liens complémentaires

Jetzt nützliche Details ansehen... plus
Produktdetails
fabricant: Alphacool
Vorbefüllt: Ja
Radiatorgröße: 360mm
Radiatordicke: 29 - 39mm
Radiatorabmessung: 395 x 124 x 30mm
Sockel: Nvidia GeForce
Questions et réponses plus
Questions et réponses
Frage von Lucas V. vom 06. June 2023
I want to extand the loop to 1m each tube. i need : 1*Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate 1*Alphacool tube AlphaTube TPV 12,7/7,6 - black matte 3,3m (10ft) retail box 2*Alphacool HF quick release connector kit TPV - Eisbaer compatible - black 1*Hose cutter that's all ???
Antwort von Administrator vom 06. June 2023
Yes and you need some liquid to fill the aio up again.
Vous avez une question ?
Note: Votre question sera visible publiquement et pourra - en plus de notre support - être traitée par un membre de notre communauté. Vous pouvez configurer votre nom visible publiquement et vos notifications par e-mail dans votre compte client.
Lire, écr. et débatt. des analyses…plus
Évaluations de clients pour "KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate"
Écrire une évaluation
Les évaluations sont publiées après vérification.

Les champs suivis d'un * sont des champs obligatoires.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.