WAH Alphacool HDX Apex Acetal M.2 2280 SSD Kühler

Alphacool HDX Apex Acetal M.2 2280 SSD Cooler

En stock – Prêt pour l'expédition immédiate !

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

378 Les visiteurs montrent de l'intérêt

277 Les clients ont récemment acheté ce produit.

Alphacool Eisplateau anti-statique travail- et montage tapis 120x60cm

59,38 €*

Alphacool Eisbaer Quick-Connect Extension Kit

22,75 €*

Alphacool Eisbaer GPX Extension Set (tuyaus et connections)

13,19 €*

Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail

19,78 €*

Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit

17,80 €*

Alphacool HF compression fitting TPV Metall - 90° rotatable 12,7/7,6mm - Black

9,88 €*

Alphacool Ultra Pure Water 1000ml

6,98 €*

31,66 € *

Prix dont TVA plus frais de port

Avertissez-moi lorsque l'article sera de nouveau disponible.

WAH Alphacool HDX Apex Acetal M.2 2280 SSD Cooler

31,66 € 0,00 € Prix dont TVA plus frais de port

SSDs in M.2 format are becoming increasingly popular. The high transfer rates and extremely low...plus

Fermer menu

Informations sur le produit

SSDs in M.2 format are becoming increasingly popular. The high transfer rates and extremely low access times allow faster and more effective working or playing on the PC. Alphacool offers the HDX Apex Acetal M.2 2280 SSD cooler so that the full performance of the M.2 2280 SSD can be used permanently. It is a useful addition to any water circuit and ensures that the M.2 SSD memory can release its full potential.

Why an active M.2 cooler?
Due to their design, M.2 SSDs are only able to deliver their maximum performance for a short time. The controller chip heats up extremely quickly and begins to throttle the performance of the M.2 SSD at an early stage in order to avoid overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. With read processes, the throttling usually occurs a few seconds later. With the Alphacool HDX Apex Acetal M.2 2280 SSD cooler, the maximum performance of the SSD can be used over a significantly longer period of time. This is clearly noticeable during longer read and write processes.

Mounting
The HDX Apex Acetal cooler is compatible with M.2 2280 SSDs that are mounted on one or both sides. If the PCB is populated with memory chips on both sides, the 0.5mm heat conduction pad is used on both sides. If memory chips are only installed on one side, then the 1.5mm heat conduction pad is used on the side without chips. Once the top and bottom of the SSD have been fitted with thermal pads, the SSD memory is pushed into the retaining clip and mounted under the cooler. The installation on the mainboard is then carried out as usual. The cooler can now be integrated into the water circuit using the existing G1/4" connections.

Copper instead of aluminium!
Alphacool only uses copper in its water coolers. The reason is simple: copper has almost twice the thermal conductivity of aluminium and is therefore the obviously better choice of material for a water cooler.

Compatibility:
- M.2 2280 SSD

Technical data cooler
L x W x H	67,99 x 25,6 x 16,8mm
Material cooler	nickle-plated copper
Material cooler top	acetal
Material clip	synthetic material
Threads	2x G1/4"
Thickness cooler bottom	1,6mm
Thermal conductivity thermal pads	3 W/mK
Pressure tested	0,8 Bar
Maximum working temperature	60°C
Weight	43g
Color	black

Remarque sur l'utilisation
A n'utiliser qu'en combinaison avec des liquides de refroidissement à eau clairs et transparents. Les particules et les additifs contenus dans les liquides Pastell peuvent obstruer et endommager durablement les produits de refroidissement à eau tels que les radiateurs, les pompes, les radiateurs et les tuyaux. Cela peut également entraîner l'annulation de la garantie du fabricant.

Produktdetails

Réf. d'article :	1021841
N° de fabricant :	11968
EAN:	4250197119689
Poids:	0,084 kg
Verfügbar:	Il y a encore plus de 10 articles disponibles

Hersteller:	Alphacool
Made in:	Chine
fabricant:	67,99 x 25,6 x 16,8mm
Anschluss:	2x G1/4"
Plancher de matériel:	Cuivre
Material Deckel:	Acétal

Liens complémentaires

plus

Fermer menu

CLP-/REACH-Hinweise

Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.

Hersteller

Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0

Hersteller Veranwortlicher

Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0

Lire, écr. et débatt. des analyses…plus

Fermer menu

Évaluations de clients pour "WAH Alphacool HDX Apex Acetal M.2 2280 SSD Cooler"

Écrire une évaluation

Les évaluations sont publiées après vérification.

Alphacool HDX Apex Acetal M.2 2280 SSD Cooler

Liens complémentaires

Articles similaires

Conseil personnel

Livraison rapide depuis l'Allemagne

Conseil et service professionnels

Bon rapport qualité-prix

Paiement sécurisé

Supplément gratuit

Droit de retour de 30 jours