Alphacool NexXxoS HPE-30 Full Copper 120mm Radiator

disponibile

Possibilità di rateizzazioni tra 99€ e 5.000€ di merce

516 I visitatori mostrano interesse
55 I clienti hanno acquistato recentemente questo prodotto.
Empfohlenes Zubehör
Aufpreis
Tubo S13 Alphacool AlphaTube TPV 12.7/7.6 - Nero opaco 3,3 m (10 piedi) scatola al dettaglio 330 cm
1x
S13 Alphacool AlphaTube TPV 12.7/7.6 - Nero opaco 3,3 m (10 piedi) scatola al dettaglio 330 cm
18,78 €*
Ugello avvitabile ANS Alphacool HF TPV - 12,7/7,6 mm dritto - nero - kit da 6
1x
avvitabile ANS Alphacool HF TPV - 12,7/7,6 mm dritto - nero - kit da 6
16,88 €*
WAC Alphacool Eisbaer Pro Aurora (Solo) - RGB digitale
1x
Alphacool Eisbaer Pro Aurora (Solo) - RGB digitale
84,18 €*
Ventola L12 Alphacool Rise Aurora da 120 mm (120x120x25 mm) PHT EOL
1x
L12 Alphacool Rise Aurora da 120 mm (120x120x25 mm)
11,86 €*
WAZ Alphacool Tec Protect 2 Trasparente 1000ml
1x
Alphacool Tec Protect 2 Trasparente 1000ml
13,88 €*
WAK Alphacool Eisblock Aurora GPX-N Piastra posteriore attiva in acrilico 3090 TI Founders Edition PHT EOL
1x
Alphacool Eisblock Aurora GPX-N Piastra posteriore attiva in acrilico 3090 TI Founders Edition
47,98 €*
73,28 € *

Prezzi incl. IVA più spese di spedizione

Informatemi non appena il prodotto è nuovamente disponibile.

Ho letto la Politica sulla protezione dei dati.

RAD Alphacool NexXxoS HPE-30 Full Copper 120mm Radiator
RAD Alphacool NexXxoS HPE-30 Full Copper 120mm Radiator
73,28 € 0,00 € Prezzi incl. IVA più spese di spedizione
For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator... altro
Informazioni sul prodotto

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.

The next step in evolution: NexXxoS HPE Full Copper Radiator!
The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.

(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)

Connection options & mounting
The NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

Patented screw plugs
All NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case.

 

Technical data radiator
L x W x H151,5 x 124 x 30mm (+/- 3%)
Quantity of cooling channels12
Material cooling fins, pre-chambers & channelscopper
Material threadsbrass
Material outer housingstainless steel
Threads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)
Possible fan size120mm
Possible fan assembly1x one-sided / 2x both-sided
Thread size fan mountingM3
Pressure tested0,8 Bar
Maximum working temperature60°C
Fin density18 FPI
Weight420g
Colorblack

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails
Numero Ordine: 1022207
N. produttore: 14468
EAN: 4250197144681
Peso: 0,567 kg
Disponibile: Ci sono più di 25 articoli ancora disponibili
Produttore: Alphacool
Alette per pollice: 18
Alloggiamento: Acciaio
Canali di raffreddamento: Rame
Doghe: Rame
Filo del ventaglio: M3
Dimensioni della ventola: 120 mm
Dimensioni (L x P x A): 151,5 x 124 x 30 mm
Connessione: 5xG1/4"
Numero di fan: 1
Spessore: 29-39 mm
Testato a pressione: 0,8 bar
Colore: Nero

Link correlati

Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "RAD Alphacool NexXxoS HPE-30 Full Copper 120mm Radiator"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.

I campi contrassegnati con * sono obbligatori.

Ho letto la Politica sulla protezione dei dati.