RAD Alphacool NexXxoS HPE-60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator

Alphacool NexXxoS HPE-60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator

In magazzino – Pronto per la spedizione immediata!

Possibilità di rateizzazioni tra 99€ e 5.000€ di merce

344 I visitatori mostrano interesse

27 I clienti hanno acquistato recentemente questo prodotto.

S13 Alphacool AlphaTube TPV 12.7/7.6 - Nero opaco 3,3 m (10 piedi) scatola al dettaglio 330 cm

19,78 €*

avvitabile ANS Alphacool HF TPV - 12,7/7,6 mm dritto - nero - kit da 6

17,80 €*

Alphacool ES set di attacchi rapidi TPV PushIn versione industriale

15,82 €*

L40 Alphacool ES da 40 mm, 400-15.000 giri/min (40x40x28 mm) - Due cuscinetti a sfera - PWM

26,78 €*

Alphacool ES Big Filtro antiparticolato in linea 2x G1/4" IT

29,68 €*

138,58 € *

Prezzi incl. IVA più spese di spedizione

Informatemi non appena il prodotto è nuovamente disponibile.

RAD Alphacool NexXxoS HPE-60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator

138,58 € 0,00 € Prezzi incl. IVA più spese di spedizione

Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world... altro

Chiudi menu

Informazioni sul prodotto

Alphacool is uncompromising in its choice of materials and is the only manufacturer in the world that uses only copper for all water-bearing parts in the radiator. The pre-chambers, cooling fins and cooling channels are made of pure copper. Only the fitting threads (made of brass) and the outer casing of the radiator (made of sheet steel) are made of other materials.

HPE = High Performance
The HPE radiators are based on the NexXxoS series. But what is new? The HPE variant has additional cooling channels and a very high fin density. Due to the technical design, the cooling capacity increases significantly without restricting the water flow within the radiator. If the radiator is equipped with fans on both sides in push/pull operation, it is possible to achieve a significant temperature reduction compared to standard radiators.

X-Flow instead of U-Flow
The water flow in classic PC radiators is U-shaped. This means that the water inlet and outlet are on the same side on the radiator. This has certain advantages in the normal PC, however, it is difficult to set up a reasonable cooling loop like this in an extremely flat server. Due to the X-Flow technology, the input and output are located on the opposite sides. This makes it very easy to create a loop in the server rack. For example, you could go out from one side, directly into a CPU, then into one or more graphics cards and the pump, then back to the radiator on the other side.

Powerful cooling performance
To maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers. Due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The high fin density of the radiator with a fin spacing of 15 FPI enables an optimal flow of air. All cooling fins are additionally equipped with small flaps. These are tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises the possible noise created by airflow.

Connection options & mounting
The NexXxoS HPE radiators each have three IN or OUT connections with G1/4" threads. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

Patented screw plugs
All NexXxoS HPE X-Flow radiators use Alphacool's patented stop fittings. Anyone who has mounted a radiator on the front or in the roof of a case is familiar with the fact that protruding stop fittings can stop the radiator from sitting flush. With the patented stop fittings, Alphacool offers an excellent solution. The stop fittings are completely recessed in the radiator and sit flush with its surface. This means that nothing stands in the way of a clean installation. Of course, the radiators also look much more elegant with the flat stop fittings.

Technical data
L x W x H	326 x 60 x 40 mm (+/- 3% tolerance in the range of the prechamber)
Quantity of cooling channels	9
Material cooling fins, channels & prechamber	copper
Material outer housing	steel
Fins per Inch	15
Cooling channels	4
Threads	6x G1/4
Thread size fan mounting	M3
Fan size	40 mm
Fan slots	7 one-sided / 14 double-sided
Pressure tested	0,8 Bar
Max working temperature	60 °C
Weight	577 g
Color	Black

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails

Numero Ordine:	1019633
N. produttore:	14373
EAN:	4250197143738
Peso:	0,78 kg
Disponibile:	Attualmente disponibili: 3 - Altro in arrivo

Produttore:	Alphacool
Fatto in:	Cina
Alette per pollice:	15
Alloggiamento:	Acciaio;
Canali di raffreddamento:	Rame
Doghe:	Rame
Filo del ventaglio:	M3
Dimensioni della ventola:	40mm;
Dimensioni (L x P x A):	326×60×40 mm
Connessione:	6xG1/4"
Numero di fan:	7;
Spessore:	49-69 mm
Testato a pressione:	0,8 bar
Colore:	Nero

Link correlati

altro

Chiudi menu

CLP-/REACH-Hinweise

Bitte beachten Sie die Gefahrenhinweise zu diesem Artikel.

Hersteller

Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0

Hersteller Veranwortlicher

Alphacool GmbH
Marienberger Str. 1
38122 Braunschweig Deutschland
info@alphacool.com
0531 28874 0

Leggere, scrivere e discutere recensioni... altro

Chiudi menu

Valutazione cliente per "RAD Alphacool NexXxoS HPE-60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator"

Scrivi una valutazione

Le valutazioni vengono attivate dopo la verifica.

Articoli simili

Alphacool

radiatore RAD Alphacool NexXxoS XT45 completamente in rame da 40 mm

42,55 € *

Prezzi incl. IVA più spese di spedizione

Alphacool

triplo RAD Alphacool NexXxoS XT45 completamente in rame da 40 mm

68,29 € *

Prezzi incl. IVA più spese di spedizione

Alphacool

singolo RAD Alphacool NexXxoS XT45 completamente in rame da 80 mm

52,45 € *

Prezzi incl. IVA più spese di spedizione

Alphacool

triplo RAD Alphacool NexXxoS XT45 completamente in rame da 80 mm

87,10 € *

Prezzi incl. IVA più spese di spedizione

Alphacool NexXxoS HPE-60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator

Link correlati

Articoli simili

Consulenza personale

Consegna veloce dalla Germania

Consulenza e servizio professionale

Buon rapporto prezzo-prestazioni

Pagamento sicuro

Bis gratuito

30 giorni di diritto di recesso