12mm (1/2") Embout Métal Cannelé 1/8" avec Joint Torique - Noir Nickel

Our trusted fittings are available in a whole new design!

Robust  high-quality barbed fitting with cylindrical thread (G1/8"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 12mm. With integrated 1/8" Perbunan(r) O-Ring seal.

Technical details:
Material: Brass, black nickel coated
Hose size: 12mm inner diameter
Thread size: G1/8"

Extent of delivery:
Black nickel barbed fitting with O-ring seal

Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required