Profitez de 50% de réduction sur vos achats lors de la vente en entrepôt ! Utilisez le code 'SAVE50' et obtenez les meilleurs prix !

Alphacool HardTube Bending Kit Basic

  • 1021069
  • 29144
  • 4250197136297
  • 1,069 kg
  • Il y a encore plus de 100 articles disponibles
1232 Les visiteurs montrent de l'intérêt
332 Les clients ont récemment acheté ce produit.

en stock

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

44,58 € *

Prix dont TVA plus frais de port

Accessoires recommandés
Supplément
SZ Alphacool Eiskdefer Prdeessional - bending & measuring kit
1x
Alphacool Eiskdefer Prdeessional - bending & measuring kit
247,48 €*
ZSO Alphacool Eiskdefer - Support de courbage à angle multiple - Grete
1x
Alphacool Eiskdefer - Support de courbage à angle multiple - Grete
24,78 €*
SZ Alphacool Eiskdefer - plaque de courbage
1x
Alphacool Eiskdefer - plaque de courbage
19,78 €*
SZ Alphacool Eiskoffer light - outil de cintrage
1x
Alphacool Eiskoffer light - outil de cintrage
59,38 €*
Avertissez-moi lorsque l'article sera de nouveau disponible.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

SZ Alphacool HardTube Bending Kit Basic
SZ Alphacool HardTube Bending Kit Basic
44,58 € 0,00 € Prix dont TVA plus frais de port
Accessoires recommandés
Supplément
SZ Alphacool Eiskdefer Prdeessional - bending & measuring kit
1x
Alphacool Eiskdefer Prdeessional - bending & measuring kit
247,48 €*
ZSO Alphacool Eiskdefer - Support de courbage à angle multiple - Grete
1x
Alphacool Eiskdefer - Support de courbage à angle multiple - Grete
24,78 €*
SZ Alphacool Eiskdefer - plaque de courbage
1x
Alphacool Eiskdefer - plaque de courbage
19,78 €*
SZ Alphacool Eiskoffer light - outil de cintrage
1x
Alphacool Eiskoffer light - outil de cintrage
59,38 €*
The Alphacool HardTube Bending Kit Basic is a versatile tool set for all those who want to equip...plus
Informations sur le produit

The Alphacool HardTube Bending Kit Basic is a versatile tool set for all those who want to equip their PC with Hardtubes. The Hardtube Basic Kit contains the most important tools needed for bending HardTubes.

Alphacool Acrylic Tubing Pipe Reamer (article 29115)
The Alphacool deburring tool has three sharp edges, with steel blades to deburr cut HardTube from the inside and remove rough sections. On the other side of the tool are the steel blades to deburr the cut outside edge of the HardTube. Making a perfect seal with your connectors.

Alphacool Eiskoffer HardTube saw tool (article 29134)
With this mitre box, cutting HardTubes is a cinch. Its special rubberised channels for 13mm and 16mm HardTubes prevent the tubes from sliding around and getting scratched. The mitre box can be anchored with two small screw clamps.

Alphacool Acrylic Double Bending Tool 12/14/16mm (article 29124)
Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy! HardTubes with a thickness of 12-14 mm as well as 16mm are all no problem. Curves of up to 180° bend neatly and easily. With the red rubber measurement guide, you can set the size of the straight section of tubing in centimeters.

Alphacool pit saw for Acryl/PETG tubes (article 29125)
The Alphacool pit saw for acryl/PETG tubes is no ordinary saw from the hardware store. Its special saw blade with fine teeth makes it perfectly suited for cutting acryl/PETG tubes. This saw blade eliminates the usual problems. Even when first placed against the tube, the teeth cut through the acryl so smoothly that there is no slipping around. Any breaking or ripping of the tube at the last few cuts is also eliminated, thanks to the fine saw teeth. It’s a familiar problem: you want to make a straight cut with the saw, but because of the thin saw blade, every cut you make gets a little more crooked?! Not an issue here. This saw blade is just thick enough not to tilt, but still thin enough to get a precise cut. With Alphacool’s pit saw, every cut is neat and straight, down to the last pull.

Alphacool Silicon Bending Insert 100cm with 10mm & 13mm diameter (article 29117 & 29126)
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed.

Liens complémentaires

Jetzt nützliche Details ansehen... plus
Produktdetails
Questions et réponses plus
Questions et réponses
Aucune question n'a encore été posée.
Vous avez une question ?
Note: Votre question sera visible publiquement et pourra - en plus de notre support - être traitée par un membre de notre communauté. Vous pouvez configurer votre nom visible publiquement et vos notifications par e-mail dans votre compte client.
Lire, écr. et débatt. des analyses…plus
Évaluations de clients pour "SZ Alphacool HardTube Bending Kit Basic"
Écrire une évaluation
Les évaluations sont publiées après vérification.

Les champs suivis d'un * sont des champs obligatoires.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.