Alphacool HardTube Bending Kit Basic

  • 1021069
  • 29144
  • 4250197136297
  • 1,069 kg
  • There are more than 50 units available
1147 Visitors show interest
310 Customers have recently purchased this product.

ready for shipment in 1-3 days

Payment by instalments available between 400€ and 5000€ value of goods

€44.58 *

Prices incl. VAT plus shipping costs

Recommended accessories
Extra Price
SZ Alphacool Eiskoffer Professional - bending & measuring kit
1x
Alphacool Eiskoffer Professional - bending & measuring kit
€247.48*
ZSO Alphacool Eiskoffer - Multi Mandrel - Big
1x
Alphacool Eiskoffer - Multi Mandrel - Big
€24.78*
SZ Alphacool Eiskoffer - bending plate
1x
Alphacool Eiskoffer - bending plate
€19.78*
SZ Alphacool Eiskoffer Light - bending kit
1x
Alphacool Eiskoffer Light - bending kit
€59.38*
SZ Alphacool HardTube Heat Gun Pro 2000W
1x
Alphacool HardTube Heat Gun Pro 2000W
€17.98*
Please inform me as soon as the product is available again.

I have read the data protection information.

SZ Alphacool HardTube Bending Kit Basic
SZ Alphacool HardTube Bending Kit Basic
€44.58 €0.00 Prices incl. VAT plus shipping costs
Recommended accessories
Extra Price
SZ Alphacool Eiskoffer Professional - bending & measuring kit
1x
Alphacool Eiskoffer Professional - bending & measuring kit
€247.48*
ZSO Alphacool Eiskoffer - Multi Mandrel - Big
1x
Alphacool Eiskoffer - Multi Mandrel - Big
€24.78*
SZ Alphacool Eiskoffer - bending plate
1x
Alphacool Eiskoffer - bending plate
€19.78*
SZ Alphacool Eiskoffer Light - bending kit
1x
Alphacool Eiskoffer Light - bending kit
€59.38*
SZ Alphacool HardTube Heat Gun Pro 2000W
1x
Alphacool HardTube Heat Gun Pro 2000W
€17.98*
The Alphacool HardTube Bending Kit Basic is a versatile tool set for all those who want to equip... more
Product information

The Alphacool HardTube Bending Kit Basic is a versatile tool set for all those who want to equip their PC with Hardtubes. The Hardtube Basic Kit contains the most important tools needed for bending HardTubes.

Alphacool Acrylic Tubing Pipe Reamer (article 29115)
The Alphacool deburring tool has three sharp edges, with steel blades to deburr cut HardTube from the inside and remove rough sections. On the other side of the tool are the steel blades to deburr the cut outside edge of the HardTube. Making a perfect seal with your connectors.

Alphacool Eiskoffer HardTube saw tool (article 29134)
With this mitre box, cutting HardTubes is a cinch. Its special rubberised channels for 13mm and 16mm HardTubes prevent the tubes from sliding around and getting scratched. The mitre box can be anchored with two small screw clamps.

Alphacool Acrylic Double Bending Tool 12/14/16mm (article 29124)
Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy! HardTubes with a thickness of 12-14 mm as well as 16mm are all no problem. Curves of up to 180° bend neatly and easily. With the red rubber measurement guide, you can set the size of the straight section of tubing in centimeters.

Alphacool pit saw for Acryl/PETG tubes (article 29125)
The Alphacool pit saw for acryl/PETG tubes is no ordinary saw from the hardware store. Its special saw blade with fine teeth makes it perfectly suited for cutting acryl/PETG tubes. This saw blade eliminates the usual problems. Even when first placed against the tube, the teeth cut through the acryl so smoothly that there is no slipping around. Any breaking or ripping of the tube at the last few cuts is also eliminated, thanks to the fine saw teeth. It’s a familiar problem: you want to make a straight cut with the saw, but because of the thin saw blade, every cut you make gets a little more crooked?! Not an issue here. This saw blade is just thick enough not to tilt, but still thin enough to get a precise cut. With Alphacool’s pit saw, every cut is neat and straight, down to the last pull.

Alphacool Silicon Bending Insert 100cm with 10mm & 13mm diameter (article 29117 & 29126)
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed.

 

Technical data

Further links

Jetzt nützliche Details ansehen... more
Produktdetails
Questions & answers... more
Questions & answers
No questions have been asked so far.
Do you have a question?
Note: Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly name and your email notifications in your customer account. configure.
Read, write and discuss reviews... more
Customer evaluation for "SZ Alphacool HardTube Bending Kit Basic"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Similar items