Watercool WCP D5

Next delivery of the item is the 30 January 2025

Payment by instalments available between 99€ and 5000€ value of goods

755 Visitors show interest

88 Customers have recently purchased this product.

Watercool HEATKILLER® D5-TOP

€40.00*

Alphacool Eisdecke DDC/D5 expansion tank individually for Alphacool Eisdecke

€29.68*

Alphacool Eisdecke D5 attachment - Black Acetal G1/4 - (VPP755/VPP655/TPP644/MCP655) V.3

€39.58*

Alphacool Eisdecke D5 attachment - acrylic G1/4 - (VPP755/VPP655/TPP644/MCP655) V.3

€39.58*

and Conditions Alphacool Ice Compartment - Single Laing D5 - Dual 5.25 Bay Station

€46.08*

Phobya external power supply 230V to 4Pin Molex 70 Watt incl. Euro/UK plug

€31.99*

Phobya Sata male to 4-pin Molex adapter

€2.98*

€79.35 *

Prices incl. VAT plus shipping costs

This product is currently not available.

Please inform me as soon as the product is available again.

PUM Watercool WCP D5

€79.35 €0.00 Prices incl. VAT plus shipping costs

The WCP D5 is a DC pump using the spherical motor design as developed by Laing. The only moving... more

Close menu

Product information

The WCP D5 is a DC pump using the spherical motor design as developed by Laing. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball.

The conventional shaft, shaft bearings, and shaft seals have been eliminated. The occurrence of bearing clearance – and the associated increase of noise – is not possible due to the principle involved. Consequently, the pump continues to work quietly throughout its entire service life.

The bearing is self-adjusting. It is lubricated directly by the medium being pumped (wet rotor design). Separate maintenance is not required. All parts in contact with the medium are corrosion resistant.

Under normal conditions, it is impossible for the rotor to become locked due to the spherical motor design. Reliable starting is also ensured even after long periods of shutdown. The permanent magnetic mechanism allows high efficiency output.

The pump's rotation speed can be finely adjusted throughout a wide output range via a speed governor, which is integrated into the stator. Thus, you may easily regulate hydraulic performance or limit power consumption. The pump always uses the same torque, independent from rotational speed, ensuring reliable starting also on the lowest power level.

The pump comes without attachment parts. Operation requires an appropriate pump cover, which is separately available.

Power supply is provided by a 4 pin Molex connector. The pump also offers a 3 pin Molex plug for rotational speed monitoring.

This version comes with a shiny palte made from stainless steel on its back.

Specifications

Dimensions (LxWxH): 65 x 65 x 57mm
Motor design: Electronically commutated spherical motor
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, aluminium oxide, hard carbon
Rated voltage: 12V DC
Power consumption: 23 W
Voltage range: 8-24V DC
Pressure head at 12 V: 3,7 m
Max. flow rate: 350 l/h
Acceptable media: Water, water-glycol mixtures
Max. system temperature: 60°C
Max. system pressure: 1,5 bar
Power supply: 4Pin Molex
Rotational speed monitoring: yes (via 3Pin Molex)
PWM: no

Produktdetails

Article no:	1011324
Manufacturer no:	30049
EAN:	4251312602352
Weight:	0,301 kg
Available:	Currently not available

Stromanschluss:	4Pin
Farbe:	schwarz
Spannung:	12V DC
Maximale Förderhöhe:	Gut (2 bis 4m)
Maximale Systemtemperatur:	60°C
Wassereinlass:	nicht vorhanden
Wasserauslass:	nicht vorhanden
Leistungsaufnahme:	23W
Maximaler Durchfluss:	1500 l/h
Abmessungen:	65 x 65 x 57mm
Möglicher Regelbereich:	40 - 80 Hz
Hersteller:	Watercool
Zugelassene Flüssigkeiten:	Wasser/Glykol-Gemisch
Material:	Keramik, Kunststoff