WAK EK Water Blocks EK-Quantum Vector Strix RX 6800/6900 D-RGB - Nickel + Acryl EOL

-43%

EK Water Blocks EK-Quantum Vector Strix RX 6800/6900 D-RGB - Nickel + Acrylic

in stock

Payment by instalments available between 99€ and 5000€ value of goods

278 Visitors show interest

1 Customers have recently purchased this product.

Alphacool Eiszapfen 13/10mm screw-on nozzle G1/4 - Deep Black

€5.91*

Alphacool Eiszapfen 13/10mm screw-on nozzle 90° rotatable G1/4 - Deep Black

€7.90*

Alphacool Eiszapfen screw plug G1/4 - Deep Black

€2.46*

Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black

€6.41*

Alphacool Subzero Thermal grease 3,5g

€6.41*

Alphacool Apex Liquid ECO 1000ml clear

€14.88*

EK Water Blocks EK-Quantum Vector Strix RX 6800/6900 Backplate - Nickel

€24.89*

€103.99 * €183.86 * (43.44% )

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

WAK EK Water Blocks EK-Quantum Vector Strix RX 6800/6900 D-RGB - Nickel + Acrylic EOL

€103.99 €183.86 Prices incl. VAT plus shipping costs

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK®... more

Close menu

Product information

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture.

EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs
EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine.

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.

The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block
The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

Backplate for the Strix 6800/6900 water block
EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections.

Technical Specification

Dimensions: (LxHxW) - 300.5x157x19.5mm

Enclosed

EK-Quantum Vector Strix RX 6800/6900 series high-performance water block
Mounting mechanism with screw-in brass standoffs
Necessary mounting screws, nuts, and washers
2x Nickel plated brass plug G1/4”
EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
Thermal pads
Thermal grease EK-TIM Ectotherm (1g)

Produktdetails

Article no:	1022112
Manufacturer no:	3831109836774
EAN:	3831109836774
Weight:	1,42 kg
Available:	Currently there are 2 available - More is on the way

Hersteller:	EK Water Blocks
Kühlertyp:	Komplettkühler
Material Bodenplatte:	Kupfer vernickelt
Material Deckel:	Acryl
Abmessungen:	300,5 x 157 x 19,5mm
Anschluss:	4x G1/4"
Hardware Hersteller:	AMD
Hardware Modell:	Radeon RX 6800, Radeon RX 6900